真空糟制鲍鱼加工工艺研究

    Study on Processing Technology of Abalone Prepared from Vacuum Tank

    • 摘要: 研究鲍鱼真空槽制最佳加工工艺条件,采用单因素试验研究蒸制时间、真空槽制时间、真空槽制温度与槽制真空度对鲍鱼品质影响;以槽制鲍鱼中氨基酸态氮含量为响应值,在单因素试验基础上选取槽制温度、槽制时间与槽制真空度进行三因素三水平响应面分析试验,优化槽制鲍鱼的最佳加工工艺,并进行验证试验。结果表明:影响槽制鲍鱼氨基酸态氮含量的因素主次顺序为槽制时间 > 槽制时间 > 槽制真空度;精制鲍鱼的最佳工艺条件为蒸制时间8 min,槽制温度30℃,槽制时间7.3 h,糟制真空度0.069 MPa;在此工艺条件下,真空槽制鲍鱼的氨基酸态氮含量为58.60 mg·hg-1,预测值为58.56 mg·hg-1,实测值与预测值基本相符。

       

      Abstract: The optimal processing conditions of abalone prepared from vacuum tank were studied in this paper. Single factor experiment was used to study the effects of steaming time, vacuum preparation time, vacuum preparation temperature and vacuum degree on abalone quality. Based on the single factor experiment, with the content of amino acid nitrogen in the abalone prepared from tank as the response value, the preparation temperature, preparation time and vacuum degree were selected to conduct the three-factor and three-level response surface analysis test, so as to optimize the best processing technology of the abalone prepared from tank and carry out the verification test. The results showed that the main order of factors affecting the content of amino acid nitrogen in the abalone prepared from tank was the preparation temperature > preparation time > vacuum degree. The best processing conditions for refining abalone were the steaming time of 8 min, the preparation temperature of 30℃, the preparation time of 7.3 h, and the vacuum degree of 0.069 MPa. Under this condition, the the content of amino acid nitrogen of the abalone prepared from vacuum tank was 58.60 mg·hg-1, and the predicted value was 58.56 mg·hg-1,showing that the measured value was basically consistent with the predicted value.

       

    /

    返回文章
    返回